New Honeywell FS24X FIRE AND FLAME DETECTOR NEW

New Honeywell FS24X FIRE AND FLAME DETECTOR NEW
New Honeywell FS24X FIRE AND FLAME DETECTOR NEW
Product Code: honeywell FS24X
Availability: 10
Price: $2,550.00
Ex Tax: $2,550.00
Qty:     - OR -   Add to Wish List
Add to Compare

New honeywell FS24X FIRE AND FLAME DETECTOR

Field of View: 90° Full 100% Cone of vision, ± 45° from on axis OR 110° Full 100%

Sensitivity: Very High, High, Medium and Low – Switch Selectable

Response Time: 3-5 Seconds to 1 sq. ft. n-Heptane fire at 100 ft.; 3-10 Seconds to 1 sq. ft. n-Heptane fire at 200 ft.

Spectral Sensitivity:Visible: 400 – 700 nanometers; Near Band IR: 0.7 – 1.1 microns; Wide Band IR: 1.1 – 3 microns; Wide Band IR: 3.0 – 5.0 microns

Operating Voltage: 24 VDC nominal (18-32 VDC) – Regulated

Communication: Analog0 – 20 mA stepped – Source or Sink User Selectabl, Relay, & RS-485, ModBus Standard: FireBus II & HART optional

Temperature Range: Operating: 110° Field of View FS24X: -40 to +185ºF (-40 to +85ºC); 90° Field of View FS24X: -76 to +185°F (-60 to +85°C); Storage: -67 to +230ºF (-55 to +110ºC)

Humidity Range: 5 to 98% relative humidity, non-condensing

Vibration: Meets or exceeds MilSpec 810C Method 514.2, Curve AW12

Wiring: 14 AWG (2.5mm2) to 22 AWG (0.326mm2); Shielded Cable Recommended

Conduit Entries: Standard: Two ¾” NPT or two M25

Enclosure Materials: Copper-Free Powder Coated Aluminum or 316 Stainless Steel

Enclosure Type: NEMA 4 & 4X, IP66

Certifications: FM: Class I, Div. 1 & 2, Groups B, C, & D; Class II, Div. 1 & 2, Groups E, F, & G; Class III

Shipping Weight: Aluminum: 3.6 lbs (1.6 kg); Stainless Steel: 7 lbs (3.2 kg)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By Toserba Center and Electronic Company