Solid state electronic flame detectors for use with Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.
Mount horizontally, vertically or at any angle in between.
Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires.
Reduced nuisance shutdowns by wiring two in parallel.
C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
C7012A,E meets NEMA 4 standards with viewing window rated to 20 psi.
C7012C,F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.
ApplicationGas, Oil or Coal fired burnersDimensions (in.)8 in. diameter x 12 in. longDimensions (mm)203 mm diameter x 305 mm longUsed WithFlame Amplifiers: R7247A,B; R7847A,B; R7257Weight (lb)14.5 lbWeight (kg)6.6 kgCommentsExplosion-proof, two piece, violet, cast aluminum enclosureMounting1 in. NPTElectrical Ratings120 VacFrequency50 Hz; 60 HzApprovals, Underwriters Laboratories Inc.Listed: File No. E34649, Guide No. ZTSZApprovals, Canadian Standards AssociationCertified: Master Report LR95329-1Electrical Connections4 NEC Class 1 Color-coded lead wires.Power Consumption2.5 WApprovals, Swiss REAcceptableApprovals, Factory MutualApproved: Report No. 14740.01Ambient Temperature Range (F)25 F to 175 FAmbient Temperature Range (C)-4 C to +79 CNEMA RatingExplosion ProofLead Length (in.)96 in.Lead Length (mm)2438 mm